1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

is it possible to use afterburner with WDS??

Discussion in 'HyperWRT Firmware' started by zaphod, Dec 26, 2005.

  1. zaphod

    zaphod Network Guru Member

    hi thibor,

    is it possible to use afterburner with 2 wds-linked wrt54gs (encrypted with wpa-psk aes) ??

    you mentioned elsewhere something with nvram-settings?

    did that work with your newest image??

    greets

    zaphod
     
  2. Thibor

    Thibor Super Moderator Staff Member Member

    nvram set wl_afterburner_override=1;nvram commit
     
  3. whatsthedeal

    whatsthedeal Network Guru Member

    so does this actually increase throughput or are afterburner and wds still mutually exclusive?
     
  4. Thibor

    Thibor Super Moderator Staff Member Member

    i've received reports that it helps, best bet is to try it yourself and see
     
  5. whatsthedeal

    whatsthedeal Network Guru Member

    i tried this with dd-wrt v23 final today and the results were bad. it decreased my network speed significantly for whatever reason. i was hoping it would work...perhaps it works better in your firmware. i'd flash to yours but I don't think you have kaid in your firmwares :(.

    anyways, thanks for the tip.
     
  6. Thibor

    Thibor Super Moderator Staff Member Member

    there is kaid for Hyperwrt, there is a script that enables it. search the forums
     
  7. Chuck_IV

    Chuck_IV Network Guru Member

    What's a good way to test my thoughput? I made the change, listed above, but don't really know if it's made any real difference or not.
     

Share This Page