1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is Satori 4 supposed to work with WRE54G?

Discussion in 'Sveasoft Firmware' started by jetster, Jul 27, 2004.

  1. jetster

    jetster Network Guru Member

    I have a WRT54G and a WRE5G (Expander). The only way I could get these working was to run the Linkysys 2.02 firmware, it wouldn't work with earlier linksys firmware. I would like to use Satori but when i installed that on my WRT54G I couldn't get the expander working anymore (i tried resetting and re-installing it) and when i revert back, everything is fine. So i guess i'm wondering if Satori 4 has whatever code is in the linksys 2.02 firmware?
  2. bummpr

    bummpr Network Guru Member

    I have tried the same thing and have had no luck connecting back to my WRT54GS running latest Satori with WDS set up.

    I really like the performance and ease of setup on the WRE54G so I reinstalled the stock Linksys firmware back to the WRT54G and am smiling again. :lol:
  3. big_redfox

    big_redfox Network Guru Member

    Yes, it works.

    All you need to do is get the WRE54G MAC addr and plug it in at wireless->WDS menu on the top part. Choose LAN on the pull down menu. Leave everything default (Lazy WDS off, the bottom part disabled). Save everything and reboot the router. Then reboot WRE54G. You should see both blue light blinking.
  4. jetster

    jetster Network Guru Member

    thanks! its working now. didn't even need to reboot the router or anything. put in the mac address set the type to lan and plaugged in the wre54g and presto 2 blinking lights. thanks again!

Share This Page