1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is there a quick HowTo to fwbuilder and DD-WRT

Discussion in 'DD-WRT Firmware' started by MBChris, Jun 29, 2005.

  1. MBChris

    MBChris Network Guru Member

    @all

    im wondering if there is a qucik HowTo anywhere to use FWBuilder on DD-WRT (like) Software.

    Anyone ?

    greets
    Chris
     
  2. jagboy

    jagboy Network Guru Member

    there is a step by step instruction thing with screen shots on the fwbuilder web site
     
  3. jagboy

    jagboy Network Guru Member

  4. jagboy

    jagboy Network Guru Member

    i tried this beofre step by step but it never worked for me. takes some time too. but hopefully it will work for you.
     
  5. MBChris

    MBChris Network Guru Member

  6. jagboy

    jagboy Network Guru Member

    no problem
     
  7. canis

    canis Network Guru Member

    FWBuilder

    I tried on DD-WRT the FWBuilder several times...
    I had no success, please quote, if you get it to run.
    Thanks
     
  8. thedogcow

    thedogcow Network Guru Member

    I have also tried that tutorial (on sveasoft talisman) and could never get it to work!
     
  9. MBChris

    MBChris Network Guru Member

    tried also, but can not get wireless working :(
     
  10. canis

    canis Network Guru Member

    Any ideas?
     
  11. aaaaaa

    aaaaaa Network Guru Member

    I use dd-wrt with FWBuilder without any issues. What problems are you having?

    I will say that the default FWB template for Linksys routers is very secure, perhaps overly so. If you don't have a good grasp of networking concepts and firewalls, I can see where you might have problems. In particular, the default template doesn't even let the router serve DHCP to LAN clients, which I suspect is where most of you are having issues. See http://www.fwbuilder.org/archives/cat_access_control.html#000077 for information on securely permitting DHCP using FWBuilder.
     

Share This Page