1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is there an RTM for noobs?

Discussion in 'General Discussion' started by briang, Feb 17, 2005.

  1. briang

    briang Guest

    I want to flash my WRT54G v2.2 with the alchemy 6 firmware, but i have a lot of questions first. I don't want to get on anyone's nerves, so if there is a previous post that explains the how to's and what if's, i'd appreciate it.

  2. t4thfavor

    t4thfavor Network Guru Member

    to get alchemy you have to subscribe to the sveasoft forum. then download the software to somewhere you will remember.

    after that log into the router and go to management or whatever the last tab is in the web configuration menu. and browse to the sveasoft file. click upgrade firmware and bam a min or two later its done.

    be sure to reset the factory defaults before the upgrade by pushing and holding the reset button for a few seconds. also do the reset after the device reboots. i dont know why that is its just good practice.

    then use the search button
  3. jdepew

    jdepew Administrator Staff Member Member

    Yup, that about covers how to do it. If you have any other questions - let us know.

    This probably deserves a FAQ entry.

Share This Page