1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is this network setup possible?

Discussion in 'Networking Issues' started by rtafoya, Mar 26, 2006.

  1. rtafoya

    rtafoya Guest

    DSL Modem
    -> D-link 614+ as wired router
    -> Netgear hub
    -> WRT54G as wireless bridge

    I don't seem to be able to ping the WRT through the hub. The D-link range is 192.168.100.*

    Would this be conflicting with the WRT address of 192.168.1.1?

    Thanks.
     
  2. bluebox

    bluebox Network Guru Member

    To connect across subnets you need routing. I'm assuming that your router either isn't in between you and the otehr subnet, or it isn't configured to route from the 192.168.1.0 to the 192.168.100.0 subnet.

    Either get all the machines on the same subnet, or configure the router to route between the subnets and your problem will be solved.
     
  3. jgutz20

    jgutz20 Network Guru Member

    why do you need the hub?
     

Share This Page