Issues forwarding ports with Tomato on Asus RT-N53

Discussion in 'Tomato Firmware' started by Theo Hjortmar, Nov 17, 2013.

  1. Theo Hjortmar

    Theo Hjortmar Reformed Router Member

    I'm seeking some assistance getting port forwarding to work with Tomato on my Asus RT-N53, I have spent a few hours trying to get it to work swapping settings around but cannot for the life of me understand why it should possibly be this tough so I am need some help to get it going.

    I just flashed to 1.28.0000 MIPSR2-114 K26 USB RT-N53 and erased NVRAM to start fresh and have made the basic changes for the network. I'll just paste pictures of all the changes I've made to make it easier for you to assist me if anyone got some time over.

    EDIT: I would also like to mention that I know that I dont need to fill in int ports and that I can just write XXXX-XXXX in ext ports but it was a desperate attempt getting it to work. :p
  2. Victek

    Victek Network Guru Member

    Looks normal, must work ... what is your path to Internet? I mean.. is your router WAN getting a public IP or it's hanged by DHCP to modem?
  3. Theo Hjortmar

    Theo Hjortmar Reformed Router Member

    Ive got a Netgear CG3100 from my ISP which is set to Bridge Mode that is connected to the RT-N53 from which my computer is connected.

    MAC Address10:BF:48:3C:32:2D
    Connection TypeDHCP
    IP Address192.168.0.10
    Subnet Mask255.255.255.0

    So I guess this means that I dont have a public IP on the router?
  4. Theo Hjortmar

    Theo Hjortmar Reformed Router Member

    Ah sweet, somehow NAT had gotten enabled on the CG3100 again after I moved to another apartment.. so it wasnt in bridge mode as I thought. Thanks!
  5. Victek

    Victek Network Guru Member

    You welcome :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice