1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Issues with open ports...

Discussion in 'DD-WRT Firmware' started by topper909, Jul 25, 2007.

  1. topper909

    topper909 LI Guru Member

    Hello!
    I have just got ddwrt going on my v5.1 wrt54gs and something strange which i noticed was that, when you open a port or trigger a port to open, it stays open forever.
    Even if you delete the entry or reboot the thing they are still kept open which is a tad annoying! So i wondered if any of you more intelligent folk had a solution :confused:

    Thanks
    Tom
     
  2. swinn

    swinn Network Guru Member

    What version and build date are you running?
     
  3. topper909

    topper909 LI Guru Member

    Well im running DD-WRT v23 SP2 (09/15/06) micro at the sec!
     
  4. swinn

    swinn Network Guru Member

    Hmm I don't recall ever having that issue with that build. You did reset to defaults after flashing, correct?

    You might try the v23 SP3 06/20/07 version and see if it still occurs. Later versions have issues which are being worked out.
     
  5. topper909

    topper909 LI Guru Member

    ok then ill try that! thanks for the help

    Tom
     
  6. topper909

    topper909 LI Guru Member

    Ok that seems to have done the trick! Must be something with that specific firmware version.. :)
     

Share This Page