I've rolled back the firmware to 2.03

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by jjjjjjj, Apr 27, 2005.

  1. jjjjjjj

    jjjjjjj Network Guru Member

    Hey... It's better than going on a 2 week binge because that is where this router is taking me. And I'm not cruel enough (yet) to flog it on ebay.
    I lose my WAN ip all the time (daily) and can't renew ip unless I reboot etc etc etc etc etc etc etc. I even have a shortcut on my desktop to the admin page to reboot it.
    I lost my palm pilot and broke my laptop so the wireless is disabled right now.
    I plan to keep going to the next firmware from linksys ftp site until this thing can properly renew the wan ip.
    Moocho grass e is
  2. TazUk

    TazUk Network Guru Member

    Never had any problems renewing WAN IP on mine in all the different firware revisions I've used :?
  3. jjjjjjj

    jjjjjjj Network Guru Member

    could it have anything to do with me being on fddi ? there is a cat5e run from the buildings basement to our unit. just a rj45 jack in the wall. I have been meaning to test it on a cable or dsl connection. so far so good though cept now my pop and smtp settings don't work. Nor can I access my isp's homepage. Hmmmm, free internet?
  4. TazUk

    TazUk Network Guru Member

    Sounds like something strange going on :? did they work with the newer firmware?
  5. jjjjjjj

    jjjjjjj Network Guru Member

    Uggraded from 2.03 to 2.10 on April 29 at about 9am.
    As of ~11pm that evening.... lost the WAN ip.
    I'm back on 2.03. Maybe when I have my sanity back I will go to a newer firmware vs. back down to 2.03 or maybe flash em all starting from 2.03

    Yes it was only 2 days on 2.03 so maybe I will leave it at that for a week.
    One note: I was able to send/receive email on 2.10 with outlook express.
    'did they work with the newer firmware'? No, this has been going on for nearly a year. Last firmware I had was that beta 2.39 which didn't help.
    I should start a blog. Nah.
  6. DocLarge

    DocLarge Super Moderator Staff Member Member

    There's a beta firmware 2.39 out now? Interesting. I just upgraded from 2.37.13 to 2.38 and have been up for one week exactly without "any" need to reboot and my LAN has been fine. The issues I've noted from other folks has been problems with "the wireless cards" and not always the hardware device. I was giving 2.38 grief until I went back and checked my configuration at the machines (wi-fi cards). I noticed an error on my DC which occurred because I forgot to disable the onboard card which was making everything sluggish and killing my DNS. After disabling the second NIC, everything is humming!!

    2.38 seems to have better wi-fi communication anyway. If you haven't done so, try running a free dynamic dns (www.dyndns.org), static ip, or both (I use both) and see if that helps because the tandem of those two give me excellent connection. Hey, my uptime is 175hrs over PPPoA and counting with no reboots, so something must be working!!!

  7. TazUk

    TazUk Network Guru Member

    I think he means 2.37.9 ;)
  8. akk142

    akk142 Network Guru Member

    What model are you guys talking about?

    What model router is this.... not the RV016 is it?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice