JTAG Question

Discussion in 'Tomato Firmware' started by PGalati, Feb 25, 2012.

  1. PGalati

    PGalati Network Guru Member

    I was given a WRT300N v1.1 that when powered on, all 4 LAN lights up. Unable to communicate at all with the device. Is the JTAG cable the same for the WRT54G series and the WRT300N v1.1? I would like to purchase a JTAG cable (advertised as a WRT54G compatible cable) but am unsure if the WRT54G and the WRT300N v1.1 use the same pinouts or not. I understand that this router may be dead dead, but I thought I would give the JTAG method a try, worth a few bucks and the education.

    I have tried doing research but have not gotten conclusive evidence either way, and I know this group can help.

    Thanks for your time and assistance.
  2. Victek

    Victek Network Guru Member

    It's same JTAG cable, yes, but, you can DIY by few cents.
  3. mstombs

    mstombs Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice