LAN and WLAN on different subnets?

Discussion in 'Tomato Firmware' started by ArcCoyote, Jan 14, 2007.

  1. ArcCoyote

    ArcCoyote Guest

    I got an idea for making use of the bridge/auto switch: One position bridges the lan and wlan, the other position puts them on separate subnets.

    Using some examples I've found for OpenWRT, i'm trying this:
    nvram set lan_ifname=vlan0
    nvram set lan_ifnames="vlan0"
    nvram set lan_ipaddr=192.168.1.1
    nvram set lan_netmask=255.255.255.0
    nvram set wifi_ifname=eth1
    nvram set wifi_proto=dhcp
    nvram set wifi_ipaddr=192.168.2.1
    nvram set wifi_netmask=255.255.255.0
    nvram commit
    reboot

    but when I reboot with this config it never configures eth1 (wifi).
    I don't know if Tomato parses the wifi_ variables like OpenWRT.

    Has anyone gotten Tomato to put the LAN and WLAN on separate subnets?

    Thanks!
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice