1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

lan doesn't work anymore after firmware change

Discussion in 'Linksys Official Firmware' started by itsmeohmy, Mar 24, 2006.

  1. itsmeohmy

    itsmeohmy Network Guru Member

    when i use alchemy1.0 everything works fine (dhcpd must be enabled)
    because my wireless throughput is 1,4MB/s, I wanted to change to the official firmware (wireless throughput 2,4MB/s) but I don't get an IP from the DHCP (lan connections), wireless is everything working.

    How can i make the lan work?

    thx in advance
  2. howardp6

    howardp6 Network Guru Member

    Did you reset to factory defaults after the firmware update. It is recommended that you do so bwforeand after a firmware update.
  3. itsmeohmy

    itsmeohmy Network Guru Member

    problem solved

    i've read somewhere that not every setting is gone with a reset.
    so i had to clear the nvram

Share This Page