1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LAN IP Addressing with 3rd Party Firmware for the WRT54G

Discussion in 'Cisco/Linksys Wireless Routers' started by Anonymous, May 27, 2005.

  1. Anonymous

    Anonymous Guest

    Is there any 3rd party firmware for the WRT54G that will allow the LAN side IP addressing to be setup in the 10.X.X.X range instead of the Linksys standard 192.168.X.X?

    Also, are there any comparisons of the different 3rd party firmewares for the WRT54G?

  2. Anonymous

    Anonymous Guest

    To clarify a bit, I would like to have a subnet on the LAN side, with DHCP support for it.

    Is this possible?
  3. Guyfromhe

    Guyfromhe Network Guru Member

    i don't see why you couldn't do that with normal linksys f/w,f it doesn't let you any 3rd party will let you do it though the console...
  4. ecsaltz

    ecsaltz Network Guru Member

    I guess I should have said that I would like to do this through the web browser GUI as oppose to the console. Would it be possible to do it that way?
  5. Guyfromhe

    Guyfromhe Network Guru Member

    i just chekced, stock linksys firmware lets you do this... you should be able to do it right from the gui just select your proper mask.

Share This Page