We are using the WRT54G on our corporate network. Our network uses a lan ip of 10.0.16.0 subnet 255.255.252.0(this gives us the ip ranges of 10.0.16.0-10.0.19.255). I have connected a cable between the WRT switch port and a network hub. I have also changed the lan ip address of the WRT to 10.0.16.xx, however, I cannot change the subnet to the correct subnet for our office. Is there a solution to this problem. As is I cannot access the WRT from the network unless the computer I use is to 10.0.16.xy as the packets cant traverse the network with the wrong subnet.