1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Like in the movies

Discussion in 'Sveasoft Firmware' started by jmabromata, Oct 8, 2005.

  1. jmabromata

    jmabromata Network Guru Member

    I see on Italian Job (the remake) the guy goes to airport or rail station with his notebook and a router I supouse to use it like a repeater to get bether signal strenght.

    This is posible use my own router on a free hot spot (or paid) to get more strenght signal?

    Thanks.

    Sorry my fair english.
     
  2. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    The client mode of the sveasoft Talisman firmware allows you to connect to another AP like a hotspot. If you are looking to extend your existing wireless network then you can use WDS(Wireless Distribution System). WDS is available in both Alchemy and Talisman.
     
  3. jmabromata

    jmabromata Network Guru Member

    On client mode the router works like a wifi card (PCI, USB, PCMCIA) with more power.

    To use WDS, I need Alchemy or Talisman or other firmware with WDS on both routers?

    Thanks
     
  4. vincentfox

    vincentfox Network Guru Member

    I *assume* your purpose is legal, like site survey or using an AP you are authorized to use?
     
  5. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Yes both routers need to support WDS.
     

Share This Page