1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Linksys BEFSX41 - plus static LAN ip addresses

Discussion in 'Cisco/Linksys Wireless Routers' started by jameshurrell, Apr 20, 2007.

  1. jameshurrell

    jameshurrell LI Guru Member

    Does anyone know if the above router "Linksys BEFSX41" can provide persistent static LAN ip addresses via DHCP, using the MAC address of the workstation - i.e. hand out the same IP address to the same workstation each time it connects?

    I don't want to input IP address information into the TCP/IP config on the workstation - i'd like it to get an IP address from DHCP automatically - but the same one each time!

    I know my Draytek Vigor 2600 can do this, but can the Linksys BEFSX41? I cannot find anything on the Linksys website in the datasheet or the userguide. I'm wondering if there is a telnet command to do it (as on the Vigor 2600) rather than via the web interface. ANd before you ask, I know the BEFSX41 is a cable/ethernet router.
  2. d__l

    d__l Network Guru Member

    The SX41 does not have "static IP" DHCP capability, nor is there any telnet command capability for the unit.

Share This Page