1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LinkSyS E3000 slow interface problem

Discussion in 'Tomato Firmware' started by luka1002, Jan 6, 2014.

  1. luka1002

    luka1002 Reformed Router Member

    Hello to everyone :)

    I am using : Tomato Firmware v1.28.7503 MIPSR2Toastman-RT K26 USB VLAN-VPN-NOCAT

    Poblem started with Utorrent. Interface of Router slows down so i must refresh every tab 10 or more time. I do not need to tell how hard is to save any changers.
    Connection limit is 8MB and the most connections i had was 600. Also router CPU was around 0.15.

    After that i tried clear NVRAM , 30/30/30 reset, reflash... Same. i even flashed orignal firmware and he is slow to...

    Surfing or lan connections are NOT affected! Only router interface!
    I do not know what to do anymore. Can someone help me please?
     
  2. Toink

    Toink Network Guru Member

    1. Is the problem the same when you access the web interface of the router via wifi?
    2. Is the problem persistent on all your devices/computers?
    3. Try replacing your LAN cable
     
  3. luka1002

    luka1002 Reformed Router Member

    Only Web interface of Router.

    On all devices!

    No matter LAN/Wifi Same thing.

    Other thing works well only interface of Router is soooo sloww that i need to refresh more that 10 time url...
     
  4. PetervdM

    PetervdM Network Guru Member

    try clearing your browser cache. or try an other browser.
     
  5. luka1002

    luka1002 Reformed Router Member

    If it is on all devices can not be problem in browser, oldo i tried and that.
     
  6. darkknight93

    darkknight93 Networkin' Nut Member

    Connect via ssh or telnet and run top command
     
  7. luka1002

    luka1002 Reformed Router Member

    [​IMG]
     
  8. darkknight93

    darkknight93 Networkin' Nut Member

    hmm that Looks fine infact. Can you maybe run wireshark while havin the page of your router opened? Maybe there is some Kind of Connection outtime/wrong addressing happening
     

Share This Page