1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Linksys Release RV016 v3.0.0.1-tm firmware

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Toxic, Jul 3, 2008.

  1. Toxic

    Toxic Administrator Staff Member

    RV016 Firmware v3.0.0.1-tm Release Note

    7/1/2008

    Changes:

    0. The v3.x firmware supports both RV016 and RV016 V2 hardware.
    1. Support Trend Micro ProtectLink Gateway service, which requires the purchase of a license key (i.e. LBATMPG05 or LBATMPG25).
    2. Fixed a UDP Port 0 DoS vulnerability issue.
    3. Upgraded the OpenSSL library from version 0.9.6d to 0.9.6e to address some
    vulnerability issues.
    4. When remote management and HTTPS are both enabled on the Firewall page, the HTTP-based remote management is no longer available. Users have to use https://<Router WAN IP>:[port number] or https://<Router WAN IP> for remote management.
    5. Administrator's username and password can both be changed on the Setup>Password page.
    6. Support 50 QuickVPN users.

    Known Issues:

    1. QuickVPN Client v1.2.8 on Windows Vista cannot work properly when the Vista PC uses a wireless adapter to connect to the network. The issue was fixed by QuickVPN Client v1.2.11.
    2. Windows Firewall needs to be enabled on Windows Vista in order for QuickVPN Client to function properly. This is due to the fact that IPSec service on Vista is disabled when Windows Firewall is disabled.
    3. QuickVPN Client v1.2.6 on Vista does not work properly when the Server Address is a DDNS domain name. This issue was fixed by QuickVPN Client v1.2.8.
    4. There is a known issue with Windows XP SP2 Firewall - ICMP packets are always dropped by the Firewall when the Firewall is enabled. The issue will cause the QuickVPN Client not being able to establish a tunnel with the remote QuickVPN Server successfully. Microsoft has released a patch to fix this issue. Once you install the patch, the issue should be resolved. http://support.microsoft.com/kb/889527/en-us

    ----------------------------------------------------------------------------------------
    RV016 Firmware v2.0.20 Release Note

    9/15/2007 (beta testing)

    Issues Fixed:

    1. Fixed an IPSec NAT-T issue that the main mode initiator does not change UDP port to 4500 in the 5th packet as required by RFC 3947.
    2. Fixed an issue with QuickVPN Client showing incorrect tunnel status. RV082 will present its LAN IP to QuickVPN Client so the Client can use it to detect whether the tunnel is truly established by ICMP ping.
    3. Fixed a problem that users in the LAN cannot access a non-standard FTP service, e.g. http://220.246.5.41/test.asp.
    4. Fixed a problem that occasionally users in the LAN cannot completely download a large file from the internet using PPPoE DSL.
    5. Fixed an issue with the VPN Client Access page where new users cannot be added if some users are already defined.
    6. Fixed an issue that router password cannot contain % sign.
     
  2. sterner

    sterner LI Guru Member

    I noticed I cannot change the username from admin...Anybody else?
     
  3. Gradius

    Gradius LI Guru Member

    On manual, page 14:

    Password
    The User Name is admin; it cannot be changed.

    Gradius
     
  4. Toxic

    Toxic Administrator Staff Member

    I have been told by Linksys support staff that the recent release notes of RV082 and RV016 contain incorrect information. It will updated on linksys.com shortly.
     
  5. adisor19

    adisor19 Network Guru Member

    Heh, been a while since I've been around here.. It's encouraging to see that Linksys is still producing firmware for these routers.

    Can anybody confirm whether they are now more stable when bittorrenting on dual wan with this latest version ?

    Adi
     
  6. Toxic

    Toxic Administrator Staff Member

    FYI the release notes have now been amended for the RV0xx series
     
  7. Gradius

    Gradius LI Guru Member

    Hi Toxic,

    This might be a little bit silly, but what's the differences between hardware v2 and v3 ?

    Thanks,
    Gradius
     

Share This Page