1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Linksys RV042 site to site VPN files problem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by kdash, Sep 7, 2006.

  1. kdash

    kdash Network Guru Member

    Hello all,
    I had setup a site to site VPN with 2 Linksys RV042 routers, it's works, i can browse the remote site PC and NAS and map the network drive, but i got error when i copy files to the remote site's network drive, small files is ok, but if the files size bigger than 100KB will get the error, have any ideas ?

    thank you very much ~_~

    Attached Files:

  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    Your mtu setting may be too high. Try setting it to 1450 at first and then lower it by increments of "25" after that.

  3. kdash

    kdash Network Guru Member

    Seems it's work now
    I set the MTU to 1450

    Thank you very much (^_^)

Share This Page