1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Linksys WET11 PCMCIA card firmware problem

Discussion in 'Linksys Official Firmware' started by ACOWA, Mar 18, 2005.

  1. ACOWA

    ACOWA Network Guru Member

    Hello.
    I have a card PRISM3 NICID: id=0x801b
    I need very much necessary initial file for this card.
    I have established, that it should refer to IDxxxxxx.hex or ICxxxxxx.hex.
    But I do not know the exact name.
    Please prompt where to me to find this file or its exact name.
    I shall be very grateful.
    P.S. I am sorry for my English.
     
  2. howardp6

    howardp6 Network Guru Member

    The WET11 is an 802.11b ethernet bridge and not a PCMCIA card. The firmware is available at the Linksys Support Site. If you meant the WPC11 PCMCIA card that uses a driver.
     
  3. ACOWA

    ACOWA Network Guru Member

  4. howardp6

    howardp6 Network Guru Member

    I looked at your link. It is indeed a PCMCIA card with external antenna connection. Is it that you wan the driver for card. I would create a restore point on your computer and try the WPC11 driver. If it does not work roll back the machine to the restore point.
     
  5. howardp6

    howardp6 Network Guru Member

    The is some FCC certification inofromation can be found on the Cisco-Linksys PKW-WM11 at thei url:https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=503456&fcc_id='PKW-WM11'
     

Share This Page