1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Linksys WRT54G V3.1

Discussion in 'Cisco/Linksys Wireless Routers' started by R34p3R, Nov 27, 2008.

  1. R34p3R

    R34p3R Addicted to LI Member

    Linksys WRT54G V3.1
    I'm not able to access the config page (192.168.1.1),please help me...
     
  2. irootsk

    irootsk Addicted to LI Member

    Well, you have to say bit more about your problem. Have you been doing something with router - changing setup, etc ... ? Does the router work normaly?
     
  3. R34p3R

    R34p3R Addicted to LI Member

    the router was working properly on a network but i move it on other network.now i can't login 192.168.1.1 actualy i can't reset it ...i plug the cable into the pc other side into the router if TCP/IP is set to automatically i see the message "network is limited or no connectivity" if i make the TCP/IP networking manualy by setting the ip 192.168.1.2 mask 255.255.255.0 gw 192.168.1.1 i have ping with 192.168.1.1 but if i try to open http://192.168.1.1 not opennig all leds on the router are correct i changed the browser and the pc too ... but no succesfull:eek:
     
  4. R34p3R

    R34p3R Addicted to LI Member

    help please ?
     
  5. CaNsA

    CaNsA Network Guru Member

    Tried holding the reset button down for about 2mins while plugging it in?
     
  6. R34p3R

    R34p3R Addicted to LI Member

    yes i hold it ... no effect ... ;(
     
  7. irootsk

    irootsk Addicted to LI Member

    R34p3R - try 30-30-30 reset. 30 seconds of holding the reset button, followed by pulling the power while holding the reset button for 30 seconds, followed by 30 more seconds after reinserting the power plug.
     

Share This Page