Linksys WRT54G Ver 7 Resets itself Randomly thus Drops Connections

Discussion in 'Cisco/Linksys Wireless Routers' started by Aquafire, May 14, 2007.

  1. Aquafire

    Aquafire LI Guru Member

    Hello All,

    Although I have posted on the forum earlier as well, I would specifically like to ask the problem of “ Linksys WRT54G Ver 7 resetting itself randomly breaking the wireless connectionsâ€.

    The supporting information is as follows :

    -- Linksys WRT54G Wireless Router Ver 7, with firmware 7.00.6 upgraded as of March-2007 (available from Chinese website of the manufacturer). Configured on Ethernet Internet Cable Connection (used in local neighborhoods, CAT5 wire running from Cable Provider’s Switch to Ethernet NIC of the customer’s desktop).

    -- There already is a switch (and probably other routers) at Cable Internet Provider’s end and at my home end I have to connect WRT54G Wireless Router with it to use this Internet connection over wireless. That’s why the CAT5 wire from the cable provider is plugged in “Regular Switch LAN Ports (1-4)†of the Wireless router, not in the “WAN†port. This lets me access the LAN shared resources of my neighborhood PCs as well (instead of using NAT and router’s assigning DHCP which gives an internal IP address to my laptop and isolates internal network from the whole neigbourhood LAN).

    My Laptop’s configuration is as follows ;

    -- HP Pavillion Dv1000 Laptop, running Windows XP SP2 (with almost all released updates from Microsoft online update) .

    -- Intel PRO/Wireless BG 2200 Wireless LAN Adapter with Intel latest drivers In the wireless driver configuration “Power Management†and “Transmit Power†sliders are set to maximum, while “Throughout Enhancement (packet bursting)†is enabled. Wireless adapter configured and working with Ubuntu Linux 6.04 as well.

    -- “Wireless Zero Configuration†as of Windows default is used to manage the Wi-Fi settings (not the Intel PROSet Utility which usually comes around with latest drivers download). The “Infrastructure Mode†for wireless LAN is used. The wireless connection in the Windows is set on DHCP mode to obtain the IP address automatically.

    My Wireless Network Configuration (in Linksys Original Firmware Configuration page)

    -- Have made a unique SSID and set to broadcast. The router and wireless card on the laptop both set in “G Only†mode since I do not have any 802.11b devices, so no need for mixed mode.

    -- Using default “Channel 11â€. WEP security method with an â€Open Passkey†authenticated when connecting to my wireless network. The MTU is default ‘1500’. Beacon Interval is ‘50’. RTS and Fragmentation threshold set to ‘2307’. Enabled ‘Burst Mode’. Made all these settings as advised by some of the gurus whom I came across searching for ways to optimize the Wireless connection.

    -- There are no other wireless routers / networks in my area neighborhood “for sureâ€. Router is placed within “2 feet†vicinity of the laptop. (basically both are placed on my room table). No substantial obstruction is present b/w the router and the laptop at all.

    My Problem

    -- The Wireless connection drops out at random intervals while browsing internet or LAN resources. This intermittent disconnection may occurs in 5 minutes or maybe in 2 hours, and causes all ongoing connections to break out and reset. The wireless connection icon in the Windows Taskbar disappears and resets itself to show the Pop-up balloon of the network name and connection strength.

    -- Initially I thought it was something to do with the Intel PRO/Wireless BG 2200 Wireless LAN Adapter, but when it happened quite often, I saw that the “Router Resets itself at random intervalsâ€. All the lights go off and come back after a while. That’s why the wireless connection with my laptop is broken. It may equally be with the WLAN Adapter but I have tried swapping the WLAN adapter too.

    -- Any idea on why is it happening or do other customers of this Linksys WRT54G Ver 7 have the same problem. Any specific firmware available to eliminate this issue, otherwise I am thinking to send it back.

    Please advise and share your information,

    Best Regards,

    Attached Files:

  2. kingvj

    kingvj Network Guru Member

    Hv u tried the 7.00.4 f/w?
  3. moesix

    moesix Guest

    the wireless on my v7 isn't even turned on and has the same constantly resetting problem. I'm currently on the 7.00.4 firmware.

    Sometimes it restarts once or twice in the day, but often much more often than that. Sometimes it even does so five or six times over and over a few minutes in between. Honestly I've been looking for a solution for awhile now and am pretty damn close to deciding it's just a piece of **** router (I had owned a v4 prior to this) and will be replacing it when I have the funds :mad:
  4. moshi16

    moshi16 LI Guru Member

    Are you using any P2P software/programs behind the router when you encounter this problem?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice