1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Linsys AM300 Ver. 1.0 (Annex A) Latest Firmware UPDATE

Discussion in 'Linksys Official Firmware' started by waredown, Aug 6, 2007.

  1. waredown

    waredown Guest

    I had complain to Linksys Technical Support Center recently (5 days ago) about the Port Forwarding problems that happened to most of the end users around the world for this model, and thanks to God they really respond fast to correct this problem.

    If you're the AM300 Ver. 1.0 user, you may go to here to download the lastest firmware which corrected the "Port Forwarding" issue.

    I have fixed my VNC (remote access software) port issue, and hopefully this fresh firmware can stand longer enough for me. For your notice, eMule, Torrent port forwarding also corrected.

    Official URL:

    =============== NOTE PORTION FROM LINKSYS WEBSITE ===========
    Linksys, A division of Cisco Systems, Inc.

    Product: AM300 (Annex A)

    Classification: Firmware Release History

    Release Date: 07/23/2007

    Firmware Version: 1.19.02

    Firmware V1.19.02 - 07/23/07
    - TI Datapump v7.2.3.0
    - Adds device configuration backup & restore feature
    - Adds ability to retain device configuration after firmware upgrade (from v1.19.02 on)
    - Resolves issue with incorrect Gateway IP address when using PPP Half Bridge
    - Resolves issue with Local DHCP server enabled when PPP Half Bridge is enabled
    - Resolves issue with Daylight Savings Time adjustment
    - Resolves issue with UPnP Discovery
    - Resolves issue with Port Forwarding failure after WAN IP change

    Firmware V1.19.00 - 02/28/2007
    - TI Datapump v6.0.2.0
    - Adds ability to disable NAT
    - Adds PPP Half Bridge
    - Adds PVC connection status to UI
    - Adds ability to Autodetect for VPI/VCI
    - Supports Windows Vista 32-bit and 64-bit
    - Resolves issue with Local DHCP server disable in Bridged Only Encapsulation
    - Resolves issue with UPnP interoperability with Windows Vista
    - Resolves issue with device reboot when opening routing table
    - Resolves issue with PPPoE negotiation fail

    Firmware V1.09
    - Initial Release

    - Not for use with -S4 or Annex B Models

    =============== END OF NOTE =============================
  2. Timshel

    Timshel New Member Member

    Anyone know where I can get a copy of this Firmware as Linksys have removed it from their download site.

Share This Page