1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

little problem, Please help

Discussion in 'DD-WRT Firmware' started by DLB527, Apr 9, 2006.

  1. DLB527

    DLB527 Network Guru Member

    Fixed :)
     
  2. DoC_DaR

    DoC_DaR Network Guru Member

    :eek: I would just reset and mark it up as lesson learned. To access the router from outside the lan you must VPN in. Any instructions on starting a telnet session and configuring by command line should only be attempted if you are comfortable with this type of procedures.
     
  3. DLB527

    DLB527 Network Guru Member

    Arg, I really really dont want to reset the router, Will be a pain the get things set back up and such.....
     
  4. Toxic

    Toxic Administrator Staff Member

    can you telnet to the router? you could startup the www service again
     
  5. DLB527

    DLB527 Network Guru Member

    telent, like as in useing putty? i have putty and it has SSH, Telent and some other stuff if thats what you mean.

    EDIT: useing putty telent seams to work fine.
     
  6. DLB527

    DLB527 Network Guru Member

    If anyone could help me out with useing the command line or telent or ssh or anything i would greatly apresheate it.
     
  7. DLB527

    DLB527 Network Guru Member

  8. AliM

    AliM Network Guru Member

    cd /www
    httpd -h /www

    then go to GUI and enable http access.
     
  9. DLB527

    DLB527 Network Guru Member

    Worked! Thanks alot man. I really apresheate it.
     

Share This Page