1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Load Balancing Question

Discussion in 'DD-WRT Firmware' started by Neoistheone2000, Nov 28, 2009.

  1. Neoistheone2000

    Neoistheone2000 LI Guru Member

    I currently have DSL and Cable and would like to use those connections together.

    I have DD-WRT on my WRT600N.

    I was thinking about getting this: http://www.amazon.com/Duolinks-SW24-2PORT-Balancing-Router/dp/B0012ZQ0GA

    What I was going to do was put the Cable modem on WAN port 1 the DSL on WAN port 2 and just put my WRT600N on LAN 1

    Would that work or would the Duolinks think the WRT600N is one computer and just run it through one connection all the time?

    IDK, would like some help if possible.

    Thank you for your time.
     
  2. mstombs

    mstombs Network Guru Member

    Can't help re Duolinks, but suspect it would work if you downgrade dd-wrt to just a router, not a nat gateway.

    Would be cheaper to get dual wan working with dd-wrt - a little light reading...

    http://www.dd-wrt.com/phpBB2/viewtopic.php?t=13869

    But I have seen the main Author has now switched to a PC running a recent Ubuntu distro on a real PC for his triple WAN
     

Share This Page