1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

load files onto WRT54G from Windows OS

Discussion in 'Cisco/Linksys Wireless Routers' started by KhanHex29, Jun 19, 2004.

  1. KhanHex29

    KhanHex29 Network Guru Member

    Router Configuration:
    WRT54G firmare: Satori V2.00.8.7 pre1 (with telnet enabled)
    LAN IP: 192.168.1.1


    In DOS command prompt I type in: telnet 192.168.1.1 to gain access to WRT54G Built-in shell (BusyBox v0.60.0). Looking around, I could see Ping utility was loaded onto the box, but I want to load Bing utility instead. How would I upload a copy of Bing into the /bin directory.

    From the telnet session, how would I grab a file from a directory off my computer running windows XP? If I was transfering from two Windows based machines I would simply use "net use" command to map drive and "copy" to transfer file.
     
  2. KhanHex29

    KhanHex29 Network Guru Member

    link to upload batbox utilities onto WRT54G: http://www.batbox.org/wrt54g-linux.html

    I have been trying to run Linux shell cygen (http://cygwin.com/) to upload file with no success yet. Method to upload files is outlined in Readme file that comes with batbox utilities, but it isn't very detailed and I am not experienced with Linux.
     
  3. zaphod

    zaphod Network Guru Member

  4. KhanHex29

    KhanHex29 Network Guru Member

  5. troycicle

    troycicle Network Guru Member

    I use winscp. You can only copy to the /tmp folder, or ram drive. It won't let you copy anything to the /bin.
     

Share This Page