local WLAN transfers stuck at <10mbit

Discussion in 'Tomato Firmware' started by Kessler, Sep 27, 2008.

  1. Kessler

    Kessler Guest

    Using tomato 1.19 and now 1.21 on an Asus WL500gp. Getting 1.2MB/sec transfers.

    One PC and a 2 laptops all with G WIFI.

    I tried with no encryption, without broadcasting SSD. Set it to mixed, G only etc.

    This is between all computers on the WLAN. All getting 'excellent' signal.

    I'm at a loss.. help?
     
  2. mstombs

    mstombs Network Guru Member

    Wireless G claims a signalling rate of 56Mbps, but the maximum real LAN to WLAN transfer throughput is around 25Mbps (maybe +35% with speedbooster/afterburner), there's lots of overhead which increases with number of clients/noise from neighbours. Wireless is half-duplex which means only send or receive, not both at same time, so wireless to wireless transfers of 1.2MBps probably just the limitation of wireless-G. Try a wireless to wired transfer - should be twice as fast.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice