1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

log question

Discussion in 'DD-WRT Firmware' started by sufrano63, Oct 13, 2005.

  1. sufrano63

    sufrano63 Network Guru Member


    Anyone know where do I enable the log to see what the sshd is saying? I'm using tunnelier (ssh client) to connect the my WRT54G running sshd server, but it kept rejecting and the author of tunnelier is unable to help unless I can post some log to why it was rejecting the ssh client.

    20:57:40.758 Starting a new SSH2 session.
    20:57:40.848 Connecting to SSH2 server xxxxxx.homeip.net:22.
    20:57:41.038 Connected.
    20:57:41.158 Starting first key exchange.
    20:57:41.228 Server version string: SSH-2.0-dropbear_0.46
    20:57:42.119 New host key received. Algorithm: ssh-rsa, Size: 1040 bits, MD5 Fingerprint: 2f:dc:2d:bd:c1:ef:47:48:43:29:49:fd:eb:7c:48:69, Bubble-Babble: xubag-sakob-fimic-fuset-kygik-kezym-vanod-pebar-tynok-duhag-fyxyx.
    20:57:44.964 First key exchange completed.
    20:57:45.034 Key exchange: diffie-hellman-group1-sha1. Session encryption: twofish-cbc, MAC: hmac-sha1, compression: none.
    20:57:45.144 Server disconnected without sending a disconnect message.

    BTW, connecting using putty works fine

    his repsonse is below

    I'm not familiar with dropbear, but the server logs should tell you what's bothering it, especially if it can be turned into a debug or verbose mode which produces diagnostic output.

    It's possible there's an incompatibility between our products and theirs, in which case either Tunnelier or dropbear will need to be fixed. Given that dropbear is new and Tunnelier has been around for 5 years, it's probably dropbear, but it could also be the other way around, you never can tell in advance.

    Let me know what the server complains about and I'll be able to say more.

    Thanks for reading. Sorry for the long post

Share This Page