1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Losing scandisk settings

Discussion in 'Cisco/Linksys Network Storage Devices' started by badassz34, Aug 8, 2010.

  1. badassz34

    badassz34 LI Guru Member

    I have two nslu2, both on 2.3r76, and both lose their scandisk setting on reboot. How do I fix this, or am I just stuck with it?

    Two months passed...
    Ok, so searching about didn't yield me anything useful, but I have found that it does this with the three Slinkys firmwares I've tried (23r63, 23r76, and some other earlier version). It seems to only affect the device this way if you've got it set to enable backup from disk1 to disk2, but if you look at the disk logs it appears to actually scan both (sometimes). I guess I could live with it this way. I'll just login every once in a while and force a scandisk on disk2 just to be sure.
    Actually, I think I'll put on my foil hat and disconnect disk2 after backup, and only hook it up weekly or so to do a scandisk and backup, as that would be less taxing on the HomeNet solar power system anyways, and would lessen the likelihood of both disks getting fried by the government's weather controller and brainwave injector systems :p
     

Share This Page