1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

lost with routing, would apprciate help

Discussion in 'Tomato Firmware' started by bidouilleur, Jan 23, 2011.

  1. bidouilleur

    bidouilleur Networkin' Nut Member

    my set up, might be a little hard to follow, I'll try to be as clear as possible

    made a little drawing, there are more machines on there but this is the route I need to create

    The IDU box is some kinda 'bridge' between my E300 and the antenna, there isn't much in there except the antenna setup and control and I'd like to be able to connect to it to have a visual on antenna link quality.
    That IDU can be directly accessed via the ip and gateway if for example you link direct to a computer (I did already). I want to avoid to disconnect the whole and connect direct each time I want to have a look at signal quality
    How can I set the routing in my E3000 , when typing in my browser I get to the IDU (via wan port in my case since my E3000 is the gateway with ISP ID's)

    not sure it is possible but can't harm to ask,

    fiddled around with static routing but didn't succeed ...

    thanks for your insight and help

    Attached Files:

Share This Page