1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

MIB for Alchemy?

Discussion in 'Sveasoft Firmware' started by robk, May 24, 2005.

  1. robk

    robk Network Guru Member

    Is there a MIB available for the WRT54G and the Alchemy firmware? I would like to know what all the OIDs are.

    Thanks!
     
  2. u3gyxap

    u3gyxap Network Guru Member

    In prefinal5, one of the older releases, I get 1400+ OIDs, without the scripting. No way to use all of them.
    I have a HowTo on how to use MRTG with prefinal5, some of the oids I have listed, for the rest use GetIf - wonderful SNMP discovery tool.

    HowTo
     
  3. robk

    robk Network Guru Member

    I am not trying to use MRTG with SNMP. I am looking to see if there is a OID that will tell me how many computers are assoicated with the AP at a given time, and also change what v-lans each port are assigned to using SNMP.

    Thanks for the reply though
     
  4. u3gyxap

    u3gyxap Network Guru Member

    I am not sure if the number of the connected clients is alreasy in the OIDs, but you can write a script, that the snmpd will execute uppon request and export the values to the SNMP client. Read the HowTo :)
    I don't think it's possible to change vlans over SNMP.
     

Share This Page