1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mixed mode? G-only? Interference issues with b-signals?

Discussion in 'Networking Issues' started by rpeters83, Mar 7, 2006.

  1. rpeters83

    rpeters83 Network Guru Member

    This continues as my attempt to fix my dropout issues. so far i might have found a fix, but am curious to what others think..

    i saw in a post before (i cant find it right now) that if the router is set to G-only mode then B-signals are interpreted as noise and can cause interference.

    i set my AP back to mixed mode and, so far, it has been working at full-kick and has not dropped out yet. where as before it would dip down to 1 mbps on almost every channel.

    your thoughts? thanks!
     
  2. bluebox

    bluebox Network Guru Member

    Ummm...anything that is not desired is noise. So if you have a G network, all the people using B stuff is noise. But it is also noise with a B network, because they are obviously not part of your network.

    In other words, everything in the 2.4 GHz band that isn't talking on your network is noise. Microwaves, cordless phones, other people's WiFi, etc, etc.
     

Share This Page