1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mode change to Hub and switch

Discussion in 'Tomato Firmware' started by pfoomer, Sep 27, 2008.

  1. pfoomer

    pfoomer LI Guru Member

    Is it possible to turn the router ethernet ports from switch mode to hub?

    reason . packet sniffing on LAN

  2. HennieM

    HennieM Network Guru Member

    I guess
    ifconfig eth0 promisc
    might help. This turns on the promiscous function, which make it "accept all packets", but I don't know if that also means "rebroadcast all packets".

    ifconfig eth0 -promisc
    to turn it off.
  3. pfoomer

    pfoomer LI Guru Member


    Re configured the network and tried that, doesnt work, but thanks for the tip.

Share This Page