1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

modem/router Sagem F@st 3504 + Linksys WRT54G

Discussion in 'Networking Issues' started by GloW_on_dub, Dec 6, 2010.

  1. GloW_on_dub

    GloW_on_dub Networkin' Nut Member

    Hi all

    I nned to connect my modem/router Sagem F@st 3504 with my router WRT54G to enable internet connexion for computer connect with WRT54G.

    First i try to enable any "bridge" mode in the Sagem F@st but i think it doesnt exist.

    After that i try to configure the two router together.
    I connect an ethernet port from the sagem to the internet port of the wrt.

    Sagem :
    ip : 192.168.1.254
    DHCP enabled
    ip from 192.168.1.100 to 192.168.1.200
    subnet mask : 255.255.255.0
    Gateway : 192.168.1.254
    Subnet : 192.168.1.0
    Broadcast : 192.168.1.255
    Primary DNS : 192.168.1.254


    Wrt:
    Internet connexion type : Automatic : DHCP

    Local ip adress : 192.168.2.1
    DHCP enabled from 192.168.2.100
    Static DNS : 192.168.1.254

    in Advanced routage :
    Operational mode : Router (not gateway)
    Dynamic Routage : Both (wan&lan)
    Static Routage : void

    Computer:
    DHCP enabled


    I can acces 192.168.2.1 without any problem.
    I cannot acces 192.168.1.254 or ping it.
    obviously i cannot access on the internet.

    What is wrong in my configuration?

    Thx for help.
     

Share This Page