1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Moving from Pre-4 back to official Linksys firmware...help

Discussion in 'DD-WRT Firmware' started by Cr0n_J0b, May 22, 2005.

  1. Cr0n_J0b

    Cr0n_J0b Network Guru Member

    I'm planning to take my core router back to the official release for several reasons. The main one is that the DHCP server keeps dying at night, which is a pain.

    Is there anything that I should know about flashing back to the original firmware? Are their any gotchas that would brick the router?

    also, has anyone looked at the leaked beta drivers from linksys? Are they any good?
     
  2. foq99

    foq99 Network Guru Member

    That is a strange problem. Maybe you could give some more info so people could help you solve it. DD-WRT is a great improvement over the Linksys! If it is a legit bug, you could help solve it. If it is just a config error then you could keep all of the cool features.

    As for going back to the original firmware, it is probably best to set all of the settings back to "Firmware Default" before flashing.
     
  3. jagboy

    jagboy Network Guru Member

    when you falsh try to flash with a hard reset. i dont know why anyoe would want to go back with linksys firmware
     

Share This Page