1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Murmur/Mumble Server

Discussion in 'Tomato Firmware' started by bucher, Mar 29, 2012.

  1. bucher

    bucher Networkin' Nut Member

    I have zero experience with this, but I was wondering if I could run a murmur server on the router? My other option would be my mybooklive, but I have no experience with either one. Is this possible?
  2. bucher

    bucher Networkin' Nut Member

  3. rs232

    rs232 Network Guru Member

    I love this forum. It always makes me want what I didn't even know it exists :-D

    Sorry I personally can't help (perhaps somebody else on the forum?) but thanks for the input!
  4. shibby20

    shibby20 Network Guru Member

    1st: you have to have installed optware!

    add my repo to your ipkg.conf (do this only ones)
    refresh ipkg
    and install umurmur
    set config file: /opt/etc/umurmur/umurmur.conf

    and start process: /opt/etc/init.d/umurmurd.rc start
    thats all :)
    bucher likes this.
  5. nakomaru

    nakomaru Reformed Router Member

    I'm having a problem with installing umurmur on Tomato Shibby release 116, on an Asus AC66U.

    First, this command runs after mounting a usb drive: mount -o bind /tmp/mnt/sda1 /opt

    Then I installed Entware using the "entware-install.sh" script that came with Shibby Release 116.

    Then I add the following line to \opt\etc\opkg.conf (it seems entware uses opkg rather than ipkg?)

    src shibby http://tomato.groov.pl/repo

    Then I run "opkg update" followed by "opkg install umurmur" and receive many "has no valid architecture, ignoring." errors, including:

    Package umurmur version 0.2.13-1 has no valid architecture, ignoring.
    Unknown package 'umurmur'.
    Collected errors:
    * opkg_install_cmd: Cannot install package umurmur.

    Can someone help me install umurmur? Thank you very much.

    [edit] Sorry, it seems entware has two versions of umurmur in their repo already, so this command works fine:

    opkg install umurmur-polarssl
    Last edited: Jan 23, 2014
  6. shibby20

    shibby20 Network Guru Member

    You cant mix entware's and optware's packages! My Umurmur is compiled for optware!

    Sent using Tapatalk
  7. Rurik

    Rurik Network Newbie Member

    @shibby20 : is it possible to have umurmur package in the arm repo?
    I do not know how to make it work and currently that is what keeps me back from upgrading my router :)

    thank you!
  8. shibby20

    shibby20 Network Guru Member

    i can try.
    WaLLy3K likes this.
  9. Rurik

    Rurik Network Newbie Member

    thank you in advance!

Share This Page