1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

MY WR54G V3 IS DEAD WHIT DD-WRT V23SP1

Discussion in 'DD-WRT Firmware' started by karikeo, May 19, 2006.

  1. karikeo

    karikeo Guest

    TENGO UN WRT54G LE ACTUALICE LA ULTIMA FIRMMWARE DE DD-WRT LE SUBIR EL CLOCK A 280 Y NO HISO NADA MAS SE KEDO PARPADEANDO Y NO PARA
    POR FAVOR AYUDENME ADEMAS NO PUEDO RECUPERARLO YA KE NO FUNCIONO NINGUN METODO Y HAGA LO KE HAGA NO ENCUENTRO EN EL PING LA DIRECCION 192.168.1.1 NO ESTA

    I HAVE A WRT54G UPDATES TO HIM COMPLETES FIRMMWARE OF DD-WRT TO RAISE THE CLOCK TO HIM 280 AND HISO NOTHING ELSE KEDO BLINKING ITSELF AND DOES NOT STOP AYUDENME PLEASE IN ADDITION I CANNOT RECOVER IT ALREADY KE I DO NOT WORK ANY METHOD
     
  2. sufrano63

    sufrano63 Network Guru Member

  3. jgxhs

    jgxhs Network Guru Member

    Now you will need to use a jtag cable and clear the NVram after you have done that it should work again.
     
  4. ofbarea

    ofbarea Network Guru Member

    Que mala suerte. Eso mismo me pasó a mí con mi WRT54G V.2.
    Luego de muchísimos intentos logre revivirlo. Que versión tienes?


    Bummer. I had the same problem with my WRT54G V.2
    After several attempts I was able to un-brick it. What version of the router do you have?
     

Share This Page