N66U on Shibby

Discussion in 'Tomato Firmware' started by w11x22, Mar 14, 2013.

  1. w11x22

    w11x22 Networkin' Nut Member

    Hi all
    I am running "Tomato Firmware 1.28.0000 MIPSR2-105 K26 USB AIO-64" On Asus N66U. It has been running for the past couple of moinths now and running solid with only one problem. My 2 devices (running Win7) disconnect from the wirless all of a sudden and then will not connect no matter what i do. I tried recreating the WL connection on Win7 machine but with no luck. The only way to connect back to WL is to reboot the Router and as soon as I rebot the ROuter the disconnected device connect right away witout any problem. I am assuming that the problem lies some where in Router as after rebooting the Router the computer connects immediatly....I have several othrer devices connected to the same Router and when Win7 machines disconnect others have no problem and they work perfectly normal.......Any ideas, folks.......
  2. f1vefour

    f1vefour Serious Server Member

    Check the log, should give some insight into what is happening.
  3. seatown

    seatown Serious Server Member

    I have been noticing this as well on 1 device its set to static dhcp. Only happens when i power back on the pc in the morning. The only way to reconnect the pc is to reboot the router, kinda weird.
  4. w11x22

    w11x22 Networkin' Nut Member

    OK, so finally I gave up on Shibby and installed RAF "Tomato Firmware v1.28.9013 MIPSR2-RAF K26 USB VLAN-VPN-NOCAT"
    It has been running for 3 days now and so far so good (crossing my fingers)... I miss BT and graphically reprsentaion of IP table etc in RAF, though
  5. ChuckHL

    ChuckHL Serious Server Member

    I have this problem only with devices running in Wireless G mode. Are your windows computer using a wireless G card?
  6. w11x22

    w11x22 Networkin' Nut Member

  7. Victek

    Victek Network Guru Member

    Please try the new Tomato Beta R.1.1 Beta for RT-N66U and report back. Thanks.
  8. w11x22

    w11x22 Networkin' Nut Member

    Hey Victec
    Nice to hear from the Guru himself. Thanks for the reply. One quick question, if you are asking me to try this Beta if I am loosing WL to the devices then let me tell you that I am fine there now after trying this RAF version as mentioned above. But if you are asking mt to try Beta to test the Graphical represention of IP Table then I would definitly give this a shot......Please let me know why do you want me to try this Beta version.......Please advise....
  9. Victek

    Victek Network Guru Member

    Thanks, just try this Beta because it's a big difference internally how modules are working, for the rest it's like the previous releases ...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice