1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

NAS200 - Firmware upgrade aborted - No more update possible

Discussion in 'Cisco/Linksys Network Storage Devices' started by myrpedder, Sep 10, 2008.

  1. myrpedder

    myrpedder Addicted to LI Member

    Hi all,
    I tried to upgrade the firmware on my NAS200 to V34R75 with file NAS200_V34R75.bin.
    The firmware seems to be loaded, Web-console schows "upgrading".
    Power LED blinks green and orange.
    After a long time, more than 30 minutes (the NAS200 told, time for upgrade is about 5 minutes), I disconnected the NAS200 from Power. After that, the NAS200 boots with it's old firmware (V34R62). Now its no more possible to upgrade to another firmware. NAS200 aborts the upgrade with "file corruotes or bad filename".

    What's wrong? How can I use another firmware? It's possible to log in via telnet to delete the old files?

    Please help. Thanks in advance

    Myrpedder
     
  2. jac_goudsmit

    jac_goudsmit Super Moderator Staff Member Member

    If it still boots, you should be able to telnet into the ecos/redboot command prompt and use the "upgrade" command to download firmware with Upslug. I'm sorry, I don't have time to give details here (damn 16 hour workdays)...

    ===Jac

    DO NOT USE THE FLASH COMMAND IN REDBOOT, YOU WILL BRICK YOUR NAS200 IMMEDIATELY WITHOUT WARNING
     
  3. myrpedder

    myrpedder Addicted to LI Member

    Thank you for your reply.

    The problem is solved! But I don't know why. I loades the firmware again, made upgrade with IE --> it works! :biggrin:

    But thank you very much for your tip with telnet while booting.

    Kind regards from Hannover (Germany)
     

Share This Page