1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

NAT + non-NAT networks

Discussion in 'Tomato Firmware' started by clarknova, Nov 30, 2011.

  1. clarknova

    clarknova Networkin' Nut Member

    On the builds that support multi-LAN (Toastman, Shibby, etc), is it possible in the GUI to leave NAT on for one network and turn it off for another, such that I can have an internal public subnet but also some hosts with RFC1918 private addresses?

Share This Page