1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ND version of Victek's (or how to compile it)

Discussion in 'Tomato Firmware' started by kerosin, Sep 30, 2008.

  1. kerosin

    kerosin Addicted to LI Member

    Is there somewhere a ND version of Victek mod?

    If not, can somebody try to point me to the direction how can I compile it by myself?

    I want to use it with my Asus WL-520GU with Victek's QOS mod

    Thank you guys :)
  2. Elanzer

    Elanzer Addicted to LI Member

    It's on Victek's site, both the new driver and old are in the same 7z (tomato.trx = ND)
  3. kerosin

    kerosin Addicted to LI Member

    Thank you, but actually with this tomato.trx my 520Gu didn't work at all.
  4. Mastec

    Mastec Network Guru Member

    Same thing happened to me. I tried the file located on his site and thought I bricked my router.
  5. Victek

    Victek Network Guru Member

    Is Asus WL-520gU compatible with Tomato? ...
  6. spicoli

    spicoli LI Guru Member

    Just a question for the vanilla speedmod, would I have to clear the nvram if I change from regular tomato?
  7. kerosin

    kerosin Addicted to LI Member

    Original Tomato 1.21(ND) is compatible with no problem and works great.

    But still I wish for you mod ;)
  8. bkmartin

    bkmartin Network Guru Member

    I'm using Victek's code just fine on the asus wl-520gu. See my post #4 in this thread http://www.linksysinfo.org/forums/showthread.php?t=57746
    on how you need to mod your nvram to get this to work. In my case (and everyone's else that does a full reset), you need this same workaround with normal Tomato as well. I guess the difference here is that you did a full reset with Victek's code and not with the original Tomato.

    Is there anyway you could fix the firmware so this workaround is not required?
  9. Victek

    Victek Network Guru Member

    Yes, if you can give me the new mapping of the ethernet and the ID code of the router I can implement as a new model to insert the mapping during the recognition of the firmware.

  10. ziddey

    ziddey Network Guru Member

    please no lies. it's not nd. thanks for having me believe i could flash it on g125
  11. Victek

    Victek Network Guru Member

    Yes, correct, the package is only for stock wireless driver, not ND version is on it. Wait some days while I'm updating to release 1.22 and make a ND build available.

Share This Page