1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help for upgrading firmware WAG200G_1.00.09

Discussion in 'Linksys Official Firmware' started by thelight, Apr 30, 2007.

  1. thelight

    thelight Guest

    Hi! I'm from Malaysia. I recently bought a Wireless-G ADSL (WAG200G-UK). After I plug in all the cable and find out that the Internet Line not blinking. Then I start searching solution from internet and download the WAG200G_1.00.09 firmware. The problem is I'm not able to upgrade it due to the firmware without FIRMWARE UPGRADE UTILITY exe file. Or its need to upgrade manually?
    I hope anyone here could solve my problem out, thanks !
     
  2. Toxic

    Toxic Administrator Staff Member

    check the User Guide - Annex D

    To upgrade the Gateway’s firmware:
    1. Download the Gateway’s firmware upgrade file from www.linksys.com.
    2. Extract the file on your computer.
    3. Open the Gateway’s Web-based Utility and click the Administration tab.
    4. Click the Firmware Upgrade tab.
    5. Click the Browse button to find the extracted file, and then double-click it.
    6. Click the Upgrade button, and follow the on-screen instructions.
     

Share This Page