1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

need help making subnet

Discussion in 'Networking Issues' started by pendiddy, May 10, 2005.

  1. pendiddy

    pendiddy Guest

    Im trying to subnet, I have one gateway router to the outside world, which is a WRT54G it has an ip of 192.168.1.1, i have two computers and another router on that network,192.1.102 and 192.1.104 are the computers and 192.1.200 is the router. On the other end of the secon router I have 192.168.2.1 and a computer 192.168.2.107. I cant seem to ping out past the router from 192.168.2.107 or get on the internet, obviously it isnt networked properly. I'm trying to use static routes, how should i set the routes up.

    any help would be appreciated.

    thanks.
     
  2. dribble

    dribble Network Guru Member

    Matching subnets

    192.168.1.1, i have two computers and another router on that network,192.1.102 and 192.1.104 (the subnet would have to be a class A)

    255.0.0.0 as only the first octet is the same.
    (personally I would bring the networks into smaller blocks 255.255.255.0 - class C)

    EG:

    192.168.1.1 router with a subnet of 255.255.252.0 allowing you to have machines on four different subnets (192.168.a.0) a being 1, 2, 3 and 4.

    That way you can have 254 hosts on each subnet.

    If you only have a small number of nodes (pcs/routers) then drop into a VLSM - all in the same class C (255.255.255.0)

    A = 192.168.1.0 > 64, B = 192.168.1.65 > 128, C = 1923.168.1.129 >192, D = 192.168.1.193 > 192.168.1.255

    Hope that helps?

    If not perhaps clarify how many machines on each network you have/intend to have.

    Cheers

    Lee
     

Share This Page