1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

need help with gateway to gateway problem

Discussion in 'Networking Issues' started by faizalmn, Jun 8, 2011.

  1. faizalmn

    faizalmn Networkin' Nut Member

    hi all,
    i'm the newbie in this forum and new tech guy also.
    i had setup network tunnel between two office where
    site A using RV082 and site B using RV042.
    tunnel established and does not have any problem. the only problem is
    site A unable to access file server in site B however
    Site B can access all servers in Site A
    that's my situation now which i cant solve.
    the file server is in different gateway where Site A have two different internet connection. i connect the two LAN using cross-cable. server is the production server so i cant set downtime because we have our email exchange inside it. please advice, i had come to dead end. i had the diagram attached.

    the diagram :
    [​IMG]
     
  2. Toxic

    Toxic Administrator Staff Member

    you need to make sure the file servers IP address is part of the remote subnet settings in the VPN tunnel.
     

Share This Page