1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help with setting dns servers.

Discussion in 'Tomato Firmware' started by kthaddock, Aug 24, 2011.

  1. kthaddock

    kthaddock Network Guru Member

    I need help to set up different dns to br0 and br1.
    br0 is my opendns with 208.67.222.222 and 208.67.220.220 and 10.0.0.0
    br1 is my ISP-regular dns servers.
    I have bro with opendns and bw limiter and br1 is without any restrictions.
    If Bssid working later on I put one wifi on br0 and one wifi one br1 with same restrictions.
    After some investigation I get this config, can someone confirm this ?

    Code:
    interface=br0
    dhcp-range=192.168.2.1,192.168.2.20,255.255.255.0,1440m
    dhcp-option=3,192.168.2.1
    dhcp-option=vlan2,6,208.67.222.222,208.67.220.220,10.0.0.0
    strict-order
    interface=br1
    dhcp-range=br1,192.168.2.2,192.168.2.20,255.255.255.0,1440m
    dhcp-option=br1,3,192.168.2.2
    dhcp-lease-max=255
    dhcp-authoritative
    I have 2 part of RT-N16 now and my goal is to use only one of them if i get this working.

    eth0 (wifi) how to assign this to either bro or br1, I wan't some on bro and some on br1 depend on opendns choose.

    Thank you !
     

Share This Page