1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Network Guidance Please

Discussion in 'Networking Issues' started by Cino72, Nov 22, 2013.

  1. Cino72

    Cino72 Reformed Router Member

    I need to make sure i have this setup right. sorry it seems like a lot of info. everything is working but i am not sure i have everything configured like it should be.

    Router #1 tomato version1.28
    Wan on and set to DHCP (cable modem assigns)
    IP 10.10.0.1
    Sub 255.255.255.0
    Gateway (Modem IP)
    wireless on
    dhcp on

    Router#2 DDwrt
    IP 10.10.0.2
    SUB 255.255.255.0
    Gateway 10.10.0.1
    wireless on
    WAN disabled using port as switch port

    Router#3 tomato version1.28
    IP 10.10.0.3
    SUB 255.255.255.0
    Gateway 10.10.0.1
    wireless on
    WAN disabled using port as switch port

    Router#5 tomato version1.28
    IP 10.10.0.5
    SUB 255.255.255.0
    Gateway 10.10.0.1
    wireless on
    WAN disabled using port as switch port

    cisco
    10.10.0.4
    running poe camera

    i question myself on the configuration on all the routers.
    Mode (Gateway)
    RIPv1 & v2 (disabled)
    Efficient Multicast Forwarding (disabled)
    DHCP Routes (enabled)
    Spanning-Tree Protocol (enabled)

    I have diff wireless sid on all routers so I can tell where I am connected. should I change this to be more of a repeater setup?

    Tomato has a ton of settings that I have no idea what they are for.I really need someone who knows tomato to direct me to change what ever cfg settings that need to be changed.

    and last but not least I have a usb drive on router #5 that I would like to be able to access from outside the network as ftp and inside the net work for simple file share but I cant seem to get that working either

    tia and if i need to provide more info i can
    [​IMG]
     

Share This Page