1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Network with Two Linksys WRT54GS routers and XBOX

Discussion in 'Networking Issues' started by Confused, Mar 7, 2005.

  1. Confused

    Confused Network Guru Member

    Please help!!

    I am trying to build a network with two WRT54GS routers. One (we'll call A) is connected to my PC and the internet. The second router (we'll call B) is connect to my XBOX. I understand this cannot be done with the Linksys firmware so I installed the lastest Hyperwrt firmware. I have read so many post close to my situation but cannot get the XBOX to share the internet connection nor connect to my computer. Can someone spare their time a provide a step by step router setup?
     
  2. t4thfavor

    t4thfavor Network Guru Member

    i use sveasoft satori 4.0 firmware so it will be a little different.
    there is a client mode. use it (assuming that they are fairly close) configure the ssid to of the client router (xbox side) the same as the internet router.
    and the channel i dont know but maybe the mac add also. then if you log on t the console of the router ( i dont know if you can do it wirh hyperwrt)
    and type something like wl assoc [SSID] im not exactly sure in this but
    you will get the point

    but i must ask why buy 2 routers why not a bridge?
    does xbox have usb? use a linksys WUSB54Gv4 or something easy
    hope that helped since noone else wanted to try.
     
  3. Confused

    Confused Network Guru Member

  4. t4thfavor

    t4thfavor Network Guru Member

    that makes alot of sence no wonder you(r) (confused) cant figure it out your not even asking questions your spammng and wasting others time.
     

Share This Page