1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Network,WLAN can`t find my Desktop PC!!

Discussion in 'Cisco/Linksys Wireless Routers' started by maus, Feb 27, 2005.

  1. maus

    maus Network Guru Member

    My Network: Desktop pc1->LAN cabel-> AP(Linksys WRT54G)->WLAN->Laptop pc2
    trying to configure my network, my laptop(pc2) as Wirelss PC having problem finding my desktop pc(pc1). configured Router(WRTG54G) as Gataway, they both can ping eachother without problems, bei searching PCs, jusst pc1 could be found, even pc2 can find pc1, but pc2 cannot bei found by both of them. Can even use pc1 from pc2 as RemoteDesktop without any problems.
    Use WAP, MAC disabled.

    plz anyone help me?? guess something is wrong with the Wreless Config. of my Router.
    Use XP prof. on both pcs.

    Thx in advance
  2. howardp6

    howardp6 Network Guru Member

    Do you have any firewall software on your PCs, You may have to disable the firewll software. In addition, are all your PCs and your laptop in the same domain or workgroup. It is necessary to be in the same workgroup or domain for your laptop to see your PCs.
  3. dadaniel

    dadaniel Network Guru Member

    Disable loopback in Sveasoft-firmware if you have it
  4. maus

    maus Network Guru Member

    have the same Workgroup for both Pcs, no Firewall aktiv(except that of the router, which i wanna be aktiv), strange ist that the desktop pc is seen and found, but somehow the wireless-connected Pc cant be found.
    I thin ic ould have something to do with the web-based-configuration of the Router in "Wireless->network maybe with the MAC adresses, which i hab disabled.

Share This Page