1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

new fw 1.01.11 for wag354g!!

Discussion in 'Other Linksys Equipment' started by masterb, Nov 30, 2006.

  1. masterb

    masterb LI Guru Member

    New firmware version for the wag354g (hardware version 1) is out. I tested it and it works :). It adds the possibility to choice the adsl modulation (as in beta 09) and there are some minor changes in pppoe.

    You can find it on the official linksys site, or, at least it is available on the italian one. Please pay attention to choose the right version (Annex A/B).

    This is the changelog:

    Linksys, A division of Cisco Systems, Inc.
    Product:                WAG354G Annex A (Hardware Version 1)
    Release Date:		25, Oct. 2006
    Classification:         Firmware Release History (ETSI)
    NOTE:  Not for use with Annex B models (E1 and DE), English only firmware.
    Disconnect all wireless clients from the gateway during the upgrade process.  
    Make sure no wireless clients attempt to associate with the gateway until 
    the upgrade process is complete.
    Firmware Version 1.01.11
    - Removed the MIB OID “†to avoid PPPoE password disclosure
    - Fixed UI bug: ARP table showed "ART/RARP" title in English language pack
    - Fixed bug: additional PPPoE Connect on Demand button did not function
    - Fixed bug: Status page showed "undefined" in time/date field
    - Fixed bug: PPPoE user name and password was revealed through MIB Browser
    Firmware Version 1.01.05
    - Fixed and updated help pages and other problems with web GUI
    - Fixed problem with LAN receiving WAN PADI packet
    - Fixed problems with SNMP 
    - Fixed problems with Management password set to blank
    - Fixed problems with QoS input values
    - Fixed problems with VPN under Manual mode
    - Fixed problems with MTU not accepting some values in manual mode
    - Fixed problems with different messages showing when PPP disconnected for
      PPPoA and PPPoE
    - Fixed problems with selecting some time zones
    Firmware Version 1.01.03
    - Initial release
  2. kaingaelt

    kaingaelt Guest

    Need FW 1.01.11 (ETSI) Annex B for WAG354G V.1


    i bought a this Linksys WAG354G v.1 at ebay ... it works very well, but i have read that there is a 1.01.11 FW Version. I got only the 1.01.03. The Download Link of the linksys FW Download Page is dead. Even on the FTP Site i couldnt find the FW 1.01.11.Version. Can someone upload the original linksys FW or send it to me pls? would be very nics...

  3. mstombs

    mstombs Network Guru Member

    Annex A version still available on Linksys UK website - not easy to get a direct link and firmwares haven't been put on the ftp site for a long time - so any you see are very old!

Share This Page