1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New Offical WAG354G Firmware Version 1.01.11

Discussion in 'Linksys Official Firmware' started by seagleye, Nov 29, 2006.

  1. seagleye

    seagleye Guest

    Linksys, A division of Cisco Systems, Inc.

    Product: WAG354G Annex A (Hardware Version 1)

    Release Date:25, Oct. 2006

    Classification: Firmware Release History (ETSI)

    NOTE: Not for use with Annex B models (E1 and DE), English only firmware.

    Disconnect all wireless clients from the gateway during the upgrade process.
    Make sure no wireless clients attempt to associate with the gateway until
    the upgrade process is complete.

    __________________________________________________________________________

    Firmware Version 1.01.11
    - Removed the MIB OID “1.3.6.1.2.1.25.4.2.1.5†to avoid PPPoE password disclosure
    - Fixed UI bug: ARP table showed "ART/RARP" title in English language pack
    - Fixed bug: additional PPPoE Connect on Demand button did not function
    - Fixed bug: Status page showed "undefined" in time/date field
    - Fixed bug: PPPoE user name and password was revealed through MIB Browser

    Firmware Version 1.01.05
    - Fixed and updated help pages and other problems with web GUI
    - Fixed problem with LAN receiving WAN PADI packet
    - Fixed problems with SNMP
    - Fixed problems with Management password set to blank
    - Fixed problems with QoS input values
    - Fixed problems with VPN under Manual mode
    - Fixed problems with MTU not accepting some values in manual mode
    - Fixed problems with different messages showing when PPP disconnected for
    PPPoA and PPPoE
    - Fixed problems with selecting some time zones

    Firmware Version 1.01.03
    - Initial release

    -------------------------------------------------------------------------
    Linksys, A division of Cisco Systems, Inc.


    Produkt/Product: WAG354G Annex B (Hardware Version 1)

    Einteilung/Classification: Firmware-Versionshistorie/
    Firmware Release History

    Versionsdatum/Release Date: 25, Oct. 2006

    Firmware-Version: 1.01.11 (ETSI)
    ____________________________________________________________

    1.01.11
    - Removed the MIB OID “1.3.6.1.2.1.25.4.2.1.5†to avoid PPPoE password disclosure
    - Fixed UI bug: ARP table showed "ART/RARP" title in English language pack
    - Fixed bug: additional PPPoE Connect on Demand button did not function
    - Fixed bug: Status page showed "undefined" in time/date field
    - Fixed bug: PPPoE user name and password was revealed through MIB Browser

    1.01.09
    - ADSL2+ Upgrade

    1.01.05
    - Updated help pages and web GUI

    1.01.03
    - Initial Release

    General Notes:
    - This firmware is only for usage with WAG354G Annex B hardware version 1 units.

    http://www-uk.linksys.com/servlet/S...940633&pagename=Linksys/Common/VisitorWrapper



    ANNEX A File:
    http://www-uk.linksys.com/servlet/S...goBlobs&blobwhere=1130843385402&ssbinary=true



    ANNEX B File: http://www-uk.linksys.com/servlet/S...goBlobs&blobwhere=1130843424360&ssbinary=true
     
  2. Advis

    Advis Network Guru Member

    At last! New and official firmware! Everything seems to work just fine. No WPA2 support is disappointing though.
     
  3. crazyheinz

    crazyheinz Guest

    How do i know witch model i have?
    A or B?
    I tried to update with the annexA but that doesn't complete :confused:
     
  4. xsilvergs

    xsilvergs LI Guru Member

    I'd like to know the answer to this question also.

    Thanks
     
  5. OSLoader

    OSLoader LI Guru Member

    Annex A/B

    Annex A is the PSTN version, Annex B - ISDN.
     
  6. OSLoader

    OSLoader LI Guru Member

    After update to 1.01.11 (Annex A) I noticed that all the dropdown boxes are like Capture(timezon.greece), Capure(share.disabled) etc. And the version indicated is still 1.01.09! Flashing back to 1.01.09 repairs the drop-down boxes. anybody else experienced this?

    Added 12-17-2006 11:33PM:

    Dropdown boxes are OK in MS Internet Explorer. Must be a bug in Opera. But still, version info says 1.01.09! WTF!
     
  7. OSLoader

    OSLoader LI Guru Member

    FW Update went OK from my other PC running Win2k +IE6. From WinXP x64 +IE7 or Opera - nevver completed!!!
     
  8. xsilvergs

    xsilvergs LI Guru Member

  9. xaxas

    xaxas Guest

    Wag354g-mib

    I would like to know if WAG354G support in MIB OID’s that could tell me through SNMP the transmission rate,throughput and the connected clients
     

Share This Page