1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New Release: V23 beta 11.11.2005 Bug Reports Here!

Discussion in 'DD-WRT Firmware' started by Cyberian75, Nov 11, 2005.

  1. Cyberian75

    Cyberian75 Network Guru Member

    11.11.2005:

    0000097 Router\client network settings showing on frot page of GUI
    note: new feature added which masquerades macs (administration)
    0000063 Logging fails
    0000084 Missing Menu & No WAN connect (WRT54GS V2)
    0000082 Sipath text correction
    0000092 Wireless_radauth.asp page incorrectly formatted
    0000014 Some pages don't apply changes "on-line"
    0000087 Tab menu error
    [hr:217c3761f5]

    Logging is working again! :thumb:
     
  2. dellsweig

    dellsweig Network Guru Member

    This works GREAT

    I have no outstanding issues....

    It is great to see the tie-in between bug requests/feature changes in the bugrtak system and the released product

    Do I smell a release ccanditate (non-beta) soon????? :thumb:
     
  3. Honki

    Honki Network Guru Member

    The VoIP-Zip 11/11/05 is intern not updated. There is Build from 10/11/05...
     
  4. sufrano63

    sufrano63 Network Guru Member

    Build 11/11/05.

    - Static DHCP is not working. DHCPd
    - Authentication Type set to Shared Key does nto work. It goes back to Auto after saving settings
     
  5. Sjowhan

    Sjowhan Network Guru Member

    And when you have enabled "Use DNSMasq for DHCP?
     
  6. flexy

    flexy Network Guru Member

    man that's crazy (in a good sense)..getting an update every day...have no time to go online because of all the flashing :)

    Nice !
     
  7. bigjohns

    bigjohns Network Guru Member

    QOS? How's it working for you delswig? Are you using dnsmasq for dhcp with 'reserved' ip's?

    John
     
  8. Cyberian75

    Cyberian75 Network Guru Member

    Works fine here with DNSMasq.
     
  9. Chuck_IV

    Chuck_IV Network Guru Member

    Good thing I saw this. I was gonna report it not working too. It does work fine for me with DNSMasq on but with it off, it does not.
     
  10. dellsweig

    dellsweig Network Guru Member

    Well

    It WAS working fine - apparently the lease ran out on the STATIC defined IP and the router assigned new addresses from the DHCP pool. I reset everything and now I cant get static working again. I tried dnsmasq on or off.

    QoS seems to be working fine though

    Logging still fails after a power cycle
     
  11. aaaaaa

    aaaaaa Network Guru Member

    Did I miss UPnP getting fixed, or is it still broken? If the latter, I really would like to see it fixed for the v23 release because at this point it is about the only serious shortcoming.
     
  12. Cyberian75

    Cyberian75 Network Guru Member

    It is still broken.
     
  13. supercomp

    supercomp Network Guru Member

    NoCatSplash still requires users to login twice before actually login them in.

    Login = Pressing I agree button
     
  14. gertjan123

    gertjan123 Network Guru Member

    /usr/bin/test in DD-WRT is broken

    #!/bin/test
    A="foo"
    B="bar"
    if test "A" = "B"; then
    echo "A=B"
    else
    echo "A!=B"
    fi

    gives error
     
  15. FLJeepGuy

    FLJeepGuy Network Guru Member

    Possible bug: Firmware: DD-WRT v23 (11/11/05) and prior...

    Hey all... I'm also having issues with the v23 beta2... I've been running several releases of this all the way back to beta1. I've got a v4 WRT54G. The issue I'm running into is that sometimes daily, sometimes every other day, the router just stops responding. I have to soft reset or pull the power to get it back online.

    I'm careful to fully reset the router to factory defaults before and after installing each release, and the firmware seems to go in fine. I'm running static DHCP for my two workstations and my printer. My wireless clients use standard DHCP.

    Other than that, I haven't really had any issues with v23.

    Any ideas?
     
  16. maxrebo

    maxrebo Network Guru Member

    I see the enable/disable option in the Administration section, but where do I configure it? I cannot find the gui for it. Also, while on that topic, what purpose does masquerading a MAC address do vs IP masquerading?
     
  17. Cyberian75

    Cyberian75 Network Guru Member

    With that enabled, the MAC Address appears on the status page:
    Code:
     PC               IP                       MAC                       Duration 
    Mike   192.168.1.110     xx:xx:xx:xx:33:8B              never 
    
     
  18. juanker

    juanker Network Guru Member

    Maybe you should change the interpreter of that script from #!/bin/test to #!/bin/sh ;)
     

Share This Page